Answered 24/7 across Little Rock and the Texarkana area
Crane-assisted tree removal in Little Rock for trees over houses
When a tree leans over the house and there is no room to lower pieces beside it, the safest way out is up. A crane holds each section before it is cut and swings it over the roof to the street.
- Sections lifted over the house
- Tight backyards
- Answered 24/7
Short answer
Crane-assisted tree removal in Little Rock is used when a big tree stands over a house, pool or garage with no safe place to lower pieces. Published 2026 local figures put large or hard-access removals around $1,000 to $1,200, and crane jobs often run higher because of the equipment. The trade-off is speed and far less risk to the structure.
Updated October 2026
How a crane removal works
The crane sets up on the street or drive with outriggers on pads. A climber ties into the tree, attaches the crane's line to a section, and cuts it free only once the crane holds its weight. The section swings over the house and down to the ground crew.
Big sections mean fewer cuts, so a tree that would take a full day of roping can come down in a morning.
What moves the price
What decides the price of a crane removal
Local market guidance: $506 to $690 for a typical removal; large trees over 60 feet or hard-access trees run about $1,000 to $1,200 (planning range from published 2026 figures, not our quote; every job is priced on site).
Crane size and reach
How far the crane must reach over the house.
Setup space
Street or drive room for outriggers and pads.
Tree size
Weight of each section sets the number of picks.
Overhead lines
Line clearance limits where the boom can swing.
Climber time
Rigging each section before the pick.
Haul-off
Big rounds need loading equipment.
Scope
What a crane removal includes
- Site check for crane setup and landing zone
- Pick plan walked through with you
- Street use arranged where required
- Each section rigged before it is cut
- Pads under outriggers to protect the drive
- Brush chipped and rounds loaded
- Pads lifted and area cleaned
Tree over a house or pool
Nothing gets lowered onto the roof or into the pool. Each piece is picked clear and carried over to the street or a landing zone we set up. Pool covers, patio furniture and decorations are moved first. The crew lead talks you through the pick plan before the crane arrives so you know where every section is going. If the tree is over a neighbor's roof too, we walk them through it as well, and the landing zone is kept clear of cars and people until the last pick is down.
Local market guidance: $506 to $690 for a typical removal; large trees over 60 feet or hard-access trees run about $1,000 to $1,200 (planning range from published 2026 figures, not our quote; every job is priced on site).
Tight-access backyard removal
Many older Little Rock lots have backyards reachable only through a gate or around the house. When the chipper and loader cannot get back, the crane lifts the wood out instead. It also saves lawns and gardens from being dragged through, and it is often the only practical way to remove a large tree behind a house with no side access. Fences stay standing, because nothing has to be carried through them, and sprinkler heads and garden beds in the path are left untouched.
Removal between power service and roof
Trees growing between the service drop and the house are awkward to rope because pieces can swing into the line. With a crane, sections are held steady before the cut, so they never swing. Entergy's lines on the pole side are handled by the utility first; we plan around the service drop to your house, and the boom's swing path is set so it never comes near the pole-side lines. That planning happens on the site visit, not the morning of the lift, so there are no surprises on the day.
How this job runs around Little Rock
Big pines and oaks close to houses are why cranes get called in around Little Rock. In July 2018, a storm uprooted large pines in the Duclair Court subdivision, the kind of tall, top-heavy trees that end up against a house when they go, where roping pieces down is too risky. Trees like that are held by the crane before a single cut, so the weight never lands on the roof. The same method works for a sound tree that simply grew too close.
How long a crane removal takes
Setup takes the first part of the day. Once the crane is in place, many trees come down in a few hours because the sections are large.
Cleanup and the stump grind, if you want it, usually finish the same day.
Equipment on tree jobs
The saw, chipper, grinder and rigging brands common across tree work
Step by step
How a crane removal day runs
- 1
Call and describe the tree
What it stands over and where a crane could set up.
- 2
Site check and pick plan
Crane size, pads and landing zone agreed.
- 3
Street permit if needed
Blocking a public street may need city approval.
- 4
Pick section by section
Each piece held before it is cut.
- 5
Clean and restore
Pads lifted, sawdust blown, lawn raked.
Straight answers
Questions we get about this
When there is no room to lower pieces, or the tree is too heavy or brittle to rope safely over a roof.
The crane adds cost, but fewer hours of rigging often offset much of it.
Outriggers sit on pads that spread the load. We check the drive before setting up.
Sometimes. We arrange whatever the city requires for the setup.
Yes. It holds the weight before cutting so the roof takes no more load.
Many are done in a morning once the crane is set up.
It is quoted separately for grinding the same day.
Related work
Other jobs we handle near this one
Fallen Tree Removal
Tree Down in the Yard and more.
More on fallen tree removalBeetle-Killed Pine Removal
Red-Crown Ips Beetle Pines and more.
See how beetle-killed pine removal worksSweetgum Tree Removal
Gumball Trees Over Patios and Pools and more.
Sweetgum Tree Removal in Little Rock
Tree over the house? let us plan the lift
Call any hour with the tree and where a crane could park. A crew lead comes out and builds the pick plan.