Skip to content
Martinez Tree ServiceLittle Rock, AR · De Kalb, TX(501) 439-8373

Crew line, answered 24/7

(501) 439-8373Little Rock service office · De Kalb head office

Answered 24/7 across Little Rock and the Texarkana area

Land clearing in Little Rock and the Texarkana area

Clearing land is mostly planning: which trees stay, where the pad goes, what happens to the stumps and the wood. Get that right on day one and the site is ready for the dirt contractor without a second trip.

  • Lot and pad clearing
  • Stumps ground or pulled
  • Answered 24/7
Land & CommercialLittle Rock service office

Short answer

Land clearing around Little Rock covers removing trees, brush and stumps from a lot, pad or fence line, with the wood chipped, hauled or left in burn piles where allowed. Little Rock's code does not require keeping private trees outside a land-use buffer, but trees in a required buffer or the public right-of-way are protected, so the plan starts with a walk of the property lines.

Updated October 2026

How a clearing job is planned

Land Clearing in Little Rock, AR

We walk the site with you and your builder's layout, flag the trees you want to keep, and mark the pad, driveway and utility paths. Trees near kept trees come down carefully so their roots and bark are not damaged.

Then the order is simple: fell and process the trees, clear brush, deal with stumps to the depth your builder needs, and leave the ground ready for grading.

Compare

Which kind of clearing fits

FactorFull clearingSelective clearingForestry mulching
What goesEverything in the marked areaChosen trees and brush onlyUnderbrush and small trees
StumpsPulled or groundGround as neededMulched at ground level
WoodHauled or piledHauled or chippedLeft as mulch on site
Best forBuilding pads and drivesLots with trees worth keepingOvergrown acreage and trails
Soil disturbanceHighModerateLow

What moves the price

What decides the price of a clearing job

  • Acreage and density

    A scattered lot versus a thicket wall to wall.

  • Tree size

    Big hardwoods take longer than small pines and brush.

  • Stumps

    Pulled under slabs, ground elsewhere.

  • What happens to the wood

    Hauled, chipped in place, or piled.

  • Trees to keep

    Working around kept trees is slower.

  • Access and slope

    Wet or steep ground limits equipment.

Lot clearing for a new build

Lot clearing for a new build in Little Rock, AR

A new house lot needs the footprint, driveway and utility runs cleared, plus enough working room around them. Stumps under the foundation and driveway are pulled, not ground, so nothing rots under the slab. Trees you keep get a buffer so equipment does not compact their roots. We coordinate with your builder so the site is cleared just ahead of the dirt work, not weeks before, which keeps the bare ground from washing out in a spring rain and into the street or a neighbor's yard.

Clearing a pad for a shop or barn

Clearing a pad for a shop or barn in Little Rock, AR

A shop pad is usually a square of ground plus room for a driveway and a turnaround. We clear it, pull or grind the stumps depending on whether concrete or gravel goes down, and pile or haul the wood. On rural lots around De Kalb and the Texarkana side, burn piles may be an option where local rules allow; closer in, the wood leaves on the truck. Good hardwood logs can be cut to firewood and stacked at the edge of the lot if you want them, and the chips from brush make a working surface for trucks while the pad goes in.

Fence-line clearing

Old fence lines grow up in privet, cedar, vines and small trees. We cut a clear strip along the line wide enough for fencing equipment, grind or cut stumps flush, and chip the brush. Trees along a shared line are discussed with you before they are cut, since ownership affects who decides. On farm and pasture lines we can work in stages so livestock fencing stays up while the old line is cleared, and the new posts go in on clear ground a few days later.

Haul-off and burn-pile options

Wood can be chipped and spread, hauled away, cut for firewood, or piled for burning where permitted. Hauling costs the most but leaves the site cleanest. Chips spread across the lot help control erosion until grading, though a thick layer has to be scraped off before a slab. We price each option so you can choose, and many clients mix them: sawlogs and firewood kept, brush chipped, stumps hauled. Tell us early, because it changes how the crew cuts the trees on the first day.

How this job runs around Little Rock

Two local facts shape clearing jobs. Little Rock's Chapter 15 does not make owners preserve private trees outside a land-use buffer, but trees inside a required buffer or in the public right-of-way are protected, so we check the lot lines before cutting. And on the Texarkana side, loblolly pine dominates the South Central Plains that cover southwest Arkansas, so most rural lots we clear there are pine timber and thicket rather than big hardwoods.

Equipment on tree jobs

The saw, chipper, grinder and rigging brands common across tree work

Step by step

How a clearing job runs

  1. 1

    Call with the plan

    Lot size, what is going in, and your builder's layout.

  2. 2

    Walk and flag the site

    Keep trees, pad, drive and utility paths marked.

  3. 3

    Fell and process

    Trees cut and processed into chips, logs or piles.

  4. 4

    Stumps and brush

    Stumps pulled or ground to your builder's depth.

  5. 5

    Ready for grading

    Site left clean for the dirt contractor.

Straight answers

Questions we get about this

Related work

Other jobs we handle near this one

Tell us what is going on the land

Call any hour with the lot size and your plans. We will walk it and price the clearing to your builder's layout.

Call and find us

One number for both offices

Hours
Answered 24 hours a day, 7 days a week
Service office
8521 Stanton Rd, Little Rock, AR 72209
Head office
637 SW Johnson St, De Kalb, TX 75559
Coverage
Little Rock metro and the Texarkana area. Where we work
Call the crew line (501) 439-8373